diff --git a/Scripts/Saturation_Recovery/satrec_exp.py b/Scripts/Saturation_Recovery/satrec_exp.py
index 02515fd..e751cf9 100644
--- a/Scripts/Saturation_Recovery/satrec_exp.py
+++ b/Scripts/Saturation_Recovery/satrec_exp.py
@@ -11,22 +11,21 @@ def experiment(): # saturation-recovery experiment
     pars = {}
     pars['P90'] = 1.7e-6	# 90-degree pulse length (s)
     pars['SF'] = 338.7e6	# spectrometer frequency (Hz)
-    pars['O1'] = -60e3		# offset from SF (Hz)
-    pars['SW'] = 200e3		# spectral window (Hz)
+    pars['SW'] = 200e3		# sampling rate (Hz)
     pars['SI'] = 1*256		# number of acquisition points
     pars['NS'] = 8		# number of scans
     pars['DS'] = 0		# number of dummy scans
     pars['TAU'] = 1		# delay for recovery (s)
     pars['DEAD1'] = 5e-6	# receiver dead time (s)
-    pars['PHA'] = 100		# receiver phase (degree) 
+    pars['PHA'] = 0		# receiver phase (degree)
       # -*- these aren't variable: -*-
-    pars['NECH'] = 40		# number of saturation pulses
+    pars['NECH'] = 7		# number of saturation pulses
     pars['D1'] = 100e-3		# starting interval in saturation sequence (s) 
     pars['D2'] = 1e-4		# end interval in saturation sequence (s) 
     pars['DATADIR'] = '/home/fprak/Students/'	# data directory
     pars['OUTFILE'] = None			# output file name
 
-  # specify a variable parameter (optional):
+    # specify a variable parameter (optional):
     pars['VAR_PAR'] = 'TAU'	# variable parameter name (a string)   
     start = 1e-3		# starting value
     stop = 5e-0			# end value
@@ -34,7 +33,7 @@ def experiment(): # saturation-recovery experiment
     log_scale = True		# log scale flag 
     stag_range = False		# staggered range flag
 
-  # check parameters for safety: 
+    # check parameters for safety:
     if pars['PHA'] < 0:
         pars['PHA'] = 360 + pars['PHA']
 
@@ -47,8 +46,7 @@ def experiment(): # saturation-recovery experiment
         raise Exception("Pulse too long!!!")
 
     if pars['NS']%4 != 0:
-        pars['NS'] = int(round(pars['NS'] / 4) + 1) * 4 
-        print 'Number of scans changed to ',pars['NS'],' due to phase cycling' 
+        print 'Number of scans should be changed to ',pars['NS'],' due to phase cycling'
 
     if pars['D1'] < pars['D2']:
         raise Exception("D1 must be greater than D2")
@@ -57,7 +55,7 @@ def experiment(): # saturation-recovery experiment
     if sat_length > 1.:
         raise Exception("Saturation sequence too long!!!")   
 
-  # start the experiment:
+    # start the experiment:
     if var_key: 
         # this is an arrayed experiment:
         if log_scale:
@@ -117,8 +115,7 @@ def satrec_experiment(pars, run):
     # read in variables:
     P90 = pars['P90']
     SF =  pars['SF']
-    O1 =  pars['O1']
-    DEAD1 = pars['DEAD1'] 
+    DEAD1 = pars['DEAD1']
     NECH = pars['NECH']
     D1 =  pars['D1']
     D2 =  pars['D2']
@@ -128,20 +125,13 @@ def satrec_experiment(pars, run):
     PH2 = pars['PH2'][run%len(pars['PH2'])]
     PHA = pars['PHA']
 
-    # set sampling parameters:
-    SI = pars['SI']
-    SW = pars['SW']
-    while SW <= 10e6 and SI < 256*1024:
-        SI *= 2
-        SW *= 2
-
     # set variable delay list for saturation pulses: 
     vdlist = log_range(D2, D1, NECH-1)
 
     # run the pulse sequence:
 
     # saturation:
-    e.set_frequency(SF+O1, phase=PH1)				# set frequency and phase for saturation pulses
+    e.set_frequency(SF, phase=PH1)				# set frequency and phase for saturation pulses
     e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		# enable RF amplifier
     e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue)		# apply 90-degree pulse
     for delay in vdlist[::-1]:
@@ -149,9 +139,9 @@ def satrec_experiment(pars, run):
         e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		# enable RF amplifier
         e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue)	# apply 90-degree pulse
 
+    e.set_phase(PH3)						# set phase for measuring pulse
     # recovery:
     e.wait(TAU)							# recovery time
-    e.set_phase(PH3)						# set phase for measuring pulse
 
     # detection:
     e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		# enable RF amplifier
diff --git a/Scripts/Saturation_Recovery/satrec_res.py b/Scripts/Saturation_Recovery/satrec_res.py
index 32a96b4..047c721 100644
--- a/Scripts/Saturation_Recovery/satrec_res.py
+++ b/Scripts/Saturation_Recovery/satrec_res.py
@@ -29,42 +29,6 @@ def result():
         # get actual sampling rate of timesignal:
         sampling_rate = timesignal.get_sampling_rate()
 
-        # get user-defined spectrum width:
-        spec_width = pars['SW']
-        
-        # specify cutoff frequency, in relative units:
-        cutoff = spec_width / sampling_rate
-                
-        if cutoff < 1: # no filter applied otherwise
-
-            # number of filter's coefficients:
-            numtaps = 29
-            
-            # use firwin to create a lowpass FIR filter:
-            fir_coeff = firwin(numtaps, cutoff)
-            
-            # downsize x according to user-defined spectral window:
-            skip = int(sampling_rate / spec_width)
-            timesignal.x = timesignal.x[::skip]
-            
-            for i in range(2):
-                # apply the filter to ith channel:
-                timesignal.y[i] = lfilter(fir_coeff, 1.0, timesignal.y[i])
-
-                # zeroize first N-1 "corrupted" samples:
-                timesignal.y[i][:numtaps-1] = 0.0
-
-                # circular left shift of y:
-                timesignal.y[i] = roll(timesignal.y[i], -(numtaps-1))    
-
-                # downsize y to user-defined number of samples (SI):
-                timesignal.y[i] = timesignal.y[i][::skip]
-
-            # update the sampling_rate attribute of the signal's:
-            timesignal.set_sampling_rate(spec_width)
-
-        # ----------------------------------------------------
-
         # rotate timesignal according to current receiver's phase:
         timesignal.phase(pars['rec_phase'])