# -*- coding: iso-8859-1 -*-

TXEnableDelay = 2e-6
TXEnableValue = 0b0001  # TTL line blanking RF amplifier (bit 0)
TXPulseValue  = 0b0010  # TTL line triggering RF pulses  (bit 1)
ADCSensitivity = 2	# voltage span for ADC

def experiment(): # Jeener-Broekaert sequence with solid-echo detection to measure T1Q [JMR 43, 213 (1981)].

  # set up acquisition parameters:
    pars = {}
    pars['P90'] = 2.3e-6	# 90-degree pulse length (s)
    pars['SF'] = 46.7e6 	# spectrometer frequency (Hz)
    pars['O1'] = 5.6e3		# offset from SF (Hz)
    pars['SW'] = 200e3		# spectrum width (Hz)
    pars['SI'] = 1*256		# number of acquisition points
    pars['NS'] = 32		# number of scans
    pars['DS'] = 0		# number of dummy scans
    pars['RD'] = .5		# delay between scans (s)
    pars['D1'] = 30e-6		# delay after first pulse or 'short tau' (s)
    pars['D2'] = 30e-6		# delay after second pulse or 'long tau' (s) 
    pars['PHA'] = -27		# receiver phase (degree)
    pars['DATADIR'] = '/home/fprak/Students/'	# data directory
    pars['OUTFILE'] = None			# output file name

  # specify a variable parameter (optional):
    pars['VAR_PAR'] = 'D2'	# variable parameter name (a string)   
    start = 30e-6		# starting value
    stop = 2e-0			# end value
    steps = 16			# number of values
    log_scale = True		# log scale flag 
    stag_range = False		# staggered range flag

  # check parameters for safety: 
    if pars['PHA'] < 0:
        pars['PHA'] = 360 + pars['PHA']

    if pars['P90'] > 20e-6:
        raise Exception("Pulse too long!!!")

    # check whether a variable parameter is named: 
    var_key = pars.get('VAR_PAR')
    if var_key == 'P90' and (start > 20e-6 or stop > 20e-6):
        raise Exception("Pulse too long!!!")

    if pars['NS']%8 != 0:
        pars['NS'] = int(round(pars['NS'] / 8) + 1) * 8 
        print 'Number of scans changed to ',pars['NS'],' due to phase cycling'

    # start the experiment:
    if var_key:
        # this is an arrayed experiment:
        if log_scale:
            array = log_range(start,stop,steps)
        else:
            array = lin_range(start,stop,steps)

        if stag_range:
            array = staggered_range(array, size = 2)

        # estimate the experiment time:
        if var_key == 'D1':
            seconds = (sum(array)*2 + (pars['D2'] + pars['RD']) * steps) * (pars['NS'] + pars['DS'])
        elif var_key == 'D2':
            seconds = (sum(array) + (pars['D1']*2 + pars['RD']) * steps) * (pars['NS'] + pars['DS'])
        elif var_key == 'RD':
            seconds = (sum(array) + (pars['D1']*2 + pars['D2']) * steps) * (pars['NS'] + pars['DS'])
        else:
            seconds = (pars['D1']*2 + pars['D2'] + pars['RD']) * steps * (pars['NS']+ pars['DS'])
        m, s = divmod(seconds, 60)
        h, m = divmod(m, 60)
        print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)

        # loop for a variable parameter:
        for index, pars[var_key] in enumerate(array):
            print 'Arrayed experiment for '+var_key+': run = '+str(index+1)+\
                             ' out of '+str(array.size)+': value = '+str(pars[var_key])
            # loop for accumulation:
            for run in xrange(pars['NS']+pars['DS']):
                yield t1q_experiment(pars, run) 
            synchronize()
    else:
       # estimate the experiment time:
        seconds = (pars['D1']*2 + pars['D2'] + pars['RD']) * (pars['NS']+ pars['DS'])
        m, s = divmod(seconds, 60)
        h, m = divmod(m, 60)
        print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)

        # loop for accumulation:
        for run in xrange(pars['NS']+pars['DS']):
            yield t1q_experiment(pars, run)


# the pulse program:

def t1q_experiment(pars, run):
    e=Experiment()

    dummy_scans = pars.get('DS')
    if dummy_scans:
        run -= dummy_scans

    pars['PROG'] = 't1q_experiment'

    # phase cycle from J. Magn. Reson. 43, 213-223 (1981) extended for 90-deg refocusing pulse which also eliminates echo(es) after 3rd 45-deg pulse: 
    pars['PH1'] = [0,   0,  90,  90,     180, 180, 270, 270] # 90-deg pulse
    pars['PH3'] = [90, 90, 180, 180,     270, 270,   0,   0] # 1st 45-deg pulse
    pars['PH4'] = [0, 180,   0, 180,     180,   0, 180,   0] # 2nd 45-deg pulse
    pars['PH5'] = [0,   0, 180, 180,     270,  90,  90, 270] # refocucing 90-deg pulse
    pars['PH2'] = [0, 180,   0, 180,     180,   0, 180,   0] # receiver


    # read in variables:
    P90 = pars['P90']
    P45 = pars['P90']*0.5
    SF =  pars['SF']
    O1 =  pars['O1']
    RD =  pars['RD']
    D1 =  pars['D1']
    D2 =  pars['D2']
    PH1 = pars['PH1'][run%len(pars['PH1'])]
    PH3 = pars['PH3'][run%len(pars['PH3'])]
    PH4 = pars['PH4'][run%len(pars['PH4'])]
    PH5 = pars['PH5'][run%len(pars['PH5'])]
    PH2 = pars['PH2'][run%len(pars['PH2'])]
    PHA = pars['PHA']

    # set sampling parameters:
    SI = pars['SI']
    SW = pars['SW']
    while SW <= 10e6 and SI < 256*1024:
        SI *= 2
        SW *= 2

   # run the pulse sequence: 
    e.wait(RD)   					# delay between scans
    e.set_frequency(SF+O1, phase=PH1)           				 
    e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		
    e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue)	# 90-degree pulse 

    e.wait(D1-P90/2-TXEnableDelay)			# 'short tau'
    e.set_phase(PH3)

    e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		
    e.ttl_pulse(P45, value=TXEnableValue|TXPulseValue)	# 45-degree pulse 

    e.wait(D2-P45/2-TXEnableDelay)			# 'long tau'
    e.set_phase(PH4)

    e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		
    e.ttl_pulse(P45, value=TXEnableValue|TXPulseValue)	# 45-degree pulse

    e.wait(10e-6-TXEnableDelay)
    e.set_phase(PH5)

    e.ttl_pulse(TXEnableDelay, value=TXEnableValue)		
    e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue)	# 90-degree pulse

    e.set_phase(PHA)
    e.wait(13e-6)       	    	               		
    e.record(SI, SW, sensitivity=ADCSensitivity)	# acquisition                                     

   # write experiment attributes:  
    for key in pars.keys():
        e.set_description(key, pars[key])		# acqusition parameters
    e.set_description('run', run)			# current scan
    e.set_description('rec_phase', -PH2)		# current receiver phase

    return e