damaris-script-library/AU_Programs/2H/op_2h_exp.py
Oleg Petrov 2b05ecd0b7
2015-09-30 12:13:20 +00:00

635 lines
24 KiB
Python

# -*- coding: iso-8859-1 -*-
TXEnableDelay = 2e-6
TXEnableValue = 0b0001 # TTL line blanking RF amplifier (bit 0)
TXPulseValue = 0b0010 # TTL line triggering RF pulses (bit 1)
ADCSensitivity = 1 # voltage span for ADC
def experiment(): # drives four experiments in a row: saturation-recovery, solid echo, spin-alignment, and Zeeman-order
# experiments on/off:
satrec2_flag = True # toggle for saturation-recovery
solidecho_flag = True # toggle for solid-echo
spinal_flag = True # toggle for spin-alignment
zeeman_flag = False # toggle for Zeeman-order
# ------------------ Saturation-recovery experiment settings ----------------------
if satrec2_flag == True:
# set up acquisition parameters:
pars = {}
pars['P90'] = 2.0e-6 # 90-degree pulse length (s)
pars['SF'] = 46.7e6 # spectrometer frequency (Hz)
pars['O1'] = -60e3 # offset from SF (Hz)
pars['SW'] = 10e6 # spectral window (Hz)
pars['SI'] = 1*512 # number of acquisition points
pars['NS'] = 8 # number of scans
pars['DS'] = 0 # number of dummy scans
pars['TAU'] = 1 # delay for recovery (s)
pars['D3'] = 20e-6 # echo delay (s)
pars['D4'] = 0 # echo pre-aquisition delay (s)
pars['PHA'] = 0 # receiver phase (degree)
# -*- these ain't variable: -*-
pars['NECH'] = 40 # number of saturation pulses
pars['D1'] = 100e-3 # starting interval in saturation sequence (s)
pars['D2'] = 1e-4 # end interval in saturation sequence (s)
pars['DATADIR'] = '/home/fprak/Students/' # data directory
pars['OUTFILE'] = None # output file name
# specify a variable parameter (optional):
pars['VAR_PAR'] = 'TAU' # variable parameter name (a string)
start = 1e-3 # starting value
stop = 1 # end value
steps = 12 # number of values
log_scale = True # log scale flag
stag_range = False # staggered range flag
# check parameters for safety:
if pars['PHA'] < 0:
pars['PHA'] = 360 + pars['PHA']
if pars['P90'] > 20e-6:
raise Exception("pulse too long!!!")
# check whether a variable parameter is named:
var_key = pars.get('VAR_PAR')
if var_key == 'P90' and (start > 20e-6 or stop > 20e-6):
raise Exception("Pulse too long!!!")
if pars['NS']%8 != 0:
pars['NS'] = int(round(pars['NS'] / 8) + 1) * 8
print 'Number of scans changed to ',pars['NS'],' due to phase cycling'
if pars['D1'] < pars['D2']:
raise Exception("D1 must be greater than D2!")
sat_length = sum(log_range(pars['D1'],pars['D2'],pars['NECH']))
if sat_length > 1.:
raise Exception("saturation sequence too long!!!")
# start the experiment:
if var_key:
# this is an arrayed experiment:
if log_scale:
array = log_range(start, stop, steps)
else:
array = lin_range(start, stop, steps)
if stag_range:
array = staggered_range(array, size = 2)
# estimate the experiment time:
if var_key == 'TAU':
seconds = ((sat_length + pars['D3']*2) * steps + sum(array)) * (pars['NS'] + pars['DS'])
elif var_key == 'D3':
seconds = ((sat_length + pars['TAU']) * steps + sum(array)*2) * (pars['NS'] + pars['DS'])
else:
seconds = (sat_length + pars['TAU'] + pars['D3']*2) * steps * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for a variable parameter:
for index, pars[var_key] in enumerate(array):
print 'Arrayed saturation-recovery experiment for '+var_key+': run = '+str(index+1)+\
' out of '+str(array.size)+': value = '+str(pars[var_key])
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield satrec2_experiment(pars, run)
synchronize()
else:
# estimate the experiment time:
seconds = (sat_length + pars['TAU'] + pars['D3']*2) * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield satrec2_experiment(pars, run)
# ------------------ Solid-echo experiment settings ----------------------
if solidecho_flag == True:
# set up acquisition parameters:
pars = {}
pars['P90'] = 2.0e-6 # 90-degree pulse length (s)
pars['SF'] = 46.7e6 # spectrometer frequency (Hz)
pars['O1'] = -60e3 # offset from SF (Hz)
pars['SW'] = 500e3 # spectral window (Hz)
pars['SI'] = 1*1024 # number of acquisition points
pars['NS'] = 8 # number of scans
pars['DS'] = 0 # number of dummy scans
pars['RD'] = 1 # delay between scans (s)
pars['TAU'] = 20e-6 # echo delay (s)
pars['D4'] = 0e-6 # echo pre-acquisition delay (s)
pars['PHA'] = 0 # receiver phase (degree)
pars['DATADIR'] = '/home/fprak/Students/' # data directory
pars['OUTFILE'] = None # output file name
# specify a variable parameter (optional):
pars['VAR_PAR'] = None # variable parameter name (a string)
start = 10e-6 # starting value
stop = 30e-6 # end value
steps = 5 # number of values
log_scale = False # log scale flag
stag_range = False # staggered range flag
# check parameters for safety:
if pars['PHA'] < 0:
pars['PHA'] = 360 + pars['PHA']
if pars['P90'] > 20e-6:
raise Exception("Pulse too long!!!")
# check whether a variable parameter is named:
var_key = pars.get('VAR_PAR')
if var_key == 'P90' and (start > 20e-6 or stop > 20e-6):
raise Exception("Pulse too long!!!")
if pars['NS']%8 != 0:
pars['NS'] = int(round(pars['NS'] / 8) + 1) * 8
print 'Number of scans changed to ',pars['NS'],' due to phase cycling'
# start the experiment:
if var_key:
# this is an arrayed experiment:
if log_scale:
array = log_range(start,stop,steps)
else:
array = lin_range(start,stop,steps)
if stag_range:
array = staggered_range(array, size = 2)
# estimate the experiment time:
if var_key == 'TAU':
seconds = (sum(array)*2 + pars['RD'] * steps) * (pars['NS'] + pars['DS'])
elif var_key == 'RD':
seconds = (sum(array) + pars['TAU']*2 * steps) * (pars['NS'] + pars['DS'])
else:
seconds = (pars['TAU']*2 + pars['RD']) * steps * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for a variable parameter:
for index, pars[var_key] in enumerate(array):
print 'Arrayed solid-echo experiment for '+var_key+': run = '+str(index+1)+\
' out of '+str(array.size)+': value = '+str(pars[var_key])
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield solidecho_experiment(pars, run)
synchronize()
else:
# estimate the experiment time:
seconds = (pars['TAU']*2 + pars['RD']) * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield solidecho_experiment(pars, run)
# ---------------- Spin-alignment experiment settings ------------------
if spinal_flag == True:
# set up acquisition parameters:
pars = {}
pars['P90'] = 2.0e-6 # 90-degree pulse length (s)
pars['SF'] = 46.7e6 # spectrometer frequency (Hz)
pars['O1'] = -60e3 # offset from SF (Hz)
pars['SW'] = 10e6 # spectral window (Hz)
pars['SI'] = 1*512 # number of acquisition points
pars['NS'] = 8 # number of scans
pars['DS'] = 0 # number of dummy scans
pars['RD'] = 1 # delay between scans (s)
pars['D1'] = 30e-6 # delay after first pulse, or tp (s)
pars['D2'] = 100e-6 # delay after second pulse, or tm (s)
pars['PHA'] = -36 # receiver phase (degree)
pars['DATADIR'] = '/home/fprak/Students/' # data directory
pars['OUTFILE'] = None # output file name
# specify a variable parameter (optional):
pars['VAR_PAR'] = 'D2' # variable parameter name (a string)
start = 30e-6 # starting value
stop = 1e-3 # end value
steps = 12 # number of values
log_scale = True # log scale flag
stag_range = False # staggered range flag
# check parameters for safety:
if pars['PHA'] < 0:
pars['PHA'] = 360 + pars['PHA']
if pars['P90'] > 20e-6:
raise Exception("Pulse too long!!!")
# check whether a variable parameter is named:
var_key = pars.get('VAR_PAR')
if var_key == 'P90' and (start > 20e-6 or stop > 20e-6):
raise Exception("Pulse too long!!!")
if pars['NS']%8 != 0:
pars['NS'] = int(round(pars['NS'] / 8) + 1) * 8
print 'Number of scans changed to ', pars['NS'], ' due to phase cycling'
# start the experiment:
if var_key:
# this is an arrayed experiment:
if log_scale:
array = log_range(start,stop,steps)
else:
array = lin_range(start,stop,steps)
if stag_range:
array = staggered_range(array, size = 2)
# estimate the experiment time:
if var_key == 'D1':
seconds = (sum(array)*2 + (pars['D2'] + pars['RD']) * steps) * (pars['NS'] + pars['DS'])
elif var_key == 'D2':
seconds = (sum(array) + (pars['D1']*2 + pars['RD']) * steps) * (pars['NS'] + pars['DS'])
elif var_key == 'RD':
seconds = (sum(array) + (pars['D1']*2 + pars['D2']) * steps) * (pars['NS'] + pars['DS'])
else:
seconds = (pars['D1']*2 + pars['D2'] + pars['RD']) * steps * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for a variable parameter:
for index, pars[var_key] in enumerate(array):
print 'Arrayed spin-alignment experiment for '+var_key+': run = '+str(index+1)+\
' out of '+str(array.size)+': value = '+str(pars[var_key])
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield spinal_experiment(pars, run)
synchronize()
else:
# estimate the experiment time:
seconds = (pars['D1']*2 + pars['D2'] + pars['RD']) * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield spinal_experiment(pars, run)
# ------------------ Zeeman-order experiment settings ----------------------
if zeeman_flag == True:
# set up acquisition parameters:
pars = {}
pars['P90'] = 2.0e-6 # 90-degree pulse length (s)
pars['SF'] = 46.7e6 # spectrometer frequency (Hz)
pars['O1'] = -60e3 # offset from SF (Hz)
pars['SW'] = 10e6 # spectral window (Hz)
pars['SI'] = 1*512 # number of acquisition points
pars['NS'] = 8 # number of scans
pars['DS'] = 0 # number of dummy scans
pars['RD'] = 1 # delay between scans (s)
pars['D1'] = 30e-6 # delay after first pulse, or 'short tau' (s)
pars['D2'] = 100e-6 # delay after second pulse, or 'long tau' (s)
pars['PHA'] = 0 # receiver phase (degree)
pars['DATADIR'] = '/home/fprak/Students/' # data directory
pars['OUTFILE'] = None # output file name
# specify a variable parameter (optional):
pars['VAR_PAR'] = 'D2' # variable parameter name (a string)
start = 30e-6 # starting value
stop = 1e-3 # end value
steps = 12 # number of values
log_scale = True # log scale flag
stag_range = False # staggered range flag
# check parameters for safety:
if pars['PHA'] < 0:
pars['PHA'] = 360 + pars['PHA']
if pars['P90'] > 20e-6:
raise Exception("Pulse too long!!!")
# check whether a variable parameter is named:
var_key = pars.get('VAR_PAR')
if var_key == 'P90' and (start > 20e-6 or stop > 20e-6):
raise Exception("Pulse too long!!!")
if pars['NS']%8 != 0:
pars['NS'] = int(round(pars['NS'] / 8) + 1) * 8
print 'Number of scans changed to ',pars['NS'],' due to phase cycling'
# start the experiment:
if var_key:
# this is an arrayed experiment:
if log_scale:
array = log_range(start,stop,steps)
else:
array = lin_range(start,stop,steps)
if stag_range:
array = staggered_range(array, size = 2)
# estimate the experiment time:
if var_key == 'D1':
seconds = (sum(array)*2 + (pars['D2'] + pars['RD']) * steps) * (pars['NS'] + pars['DS'])
elif var_key == 'D2':
seconds = (sum(array) + (pars['D1']*2 + pars['RD']) * steps) * (pars['NS'] + pars['DS'])
elif var_key == 'RD':
seconds = (sum(array) + (pars['D1']*2 + pars['D2']) * steps) * (pars['NS'] + pars['DS'])
else:
seconds = (pars['D1']*2 + pars['D2'] + pars['RD']) * steps * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for a variable parameter:
for index, pars[var_key] in enumerate(array):
print 'Arrayed Zeeman-order experiment for '+var_key+': run = '+str(index+1)+\
' out of '+str(array.size)+': value = '+str(pars[var_key])
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield zeeman_experiment(pars, run)
synchronize()
else:
# estimate the experiment time:
seconds = (pars['D1']*2 + pars['D2'] + pars['RD']) * (pars['NS']+ pars['DS'])
m, s = divmod(seconds, 60)
h, m = divmod(m, 60)
print '%s%02d:%02d:%02d' % ('Experiment time estimated: ', h, m, s)
# loop for accumulation:
for run in xrange(pars['NS']+pars['DS']):
yield zeeman_experiment(pars, run)
# the pulse programs:
def satrec2_experiment(pars, run):
e=Experiment()
dummy_scans = pars.get('DS')
if dummy_scans:
run -= dummy_scans
pars['PROG'] = 'satrec2_experiment'
# phase lists:
pars['PH1'] = [ 0] # saturation pulses
pars['PH3'] = [ 0, 180, 0, 180, 90, 270, 90, 270] # 1st 90-degree pulse
pars['PH4'] = [90, 90, 270, 270, 0, 0, 180, 180] # 2nd 90-degree pulse
pars['PH2'] = [ 0, 180, 0, 180, 90, 270, 90, 270] # receiver
# read in variables:
P90 = pars['P90']
SF = pars['SF']
O1 = pars['O1']
NECH = pars['NECH']
D1 = pars['D1']
D2 = pars['D2']
D3 = pars['D3']
D4 = pars['D4']
TAU = pars['TAU']
PH1 = pars['PH1'][run%len(pars['PH1'])]
PH3 = pars['PH3'][run%len(pars['PH3'])]
PH4 = pars['PH4'][run%len(pars['PH4'])]
PH2 = pars['PH2'][run%len(pars['PH2'])]
PHA = pars['PHA']
# set variable delay list for saturation pulses:
vdlist = log_range(D2, D1, NECH-1)
# set sampling parameters:
SI = pars['SI']
SW = pars['SW']
while SW <= 10e6 and SI < 256*1024:
SI *= 2
SW *= 2
# the pulse sequence:
# saturation:
e.set_frequency(SF+O1, phase=PH1) # set frequency and phase for saturation pulses
e.ttl_pulse(TXEnableDelay, value=TXEnableValue) # enable RF amplifier
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # apply 90-degree pulse
for delay in vdlist[::-1]:
e.wait(delay-P90-TXEnableDelay) # wait for next saturation pulse
e.ttl_pulse(TXEnableDelay, value=TXEnableValue) # enable RF amplifier
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # apply 90-degree pulse
# recovery:
e.wait(TAU) # wait for tau
e.set_phase(PH3) # set phase for next pulse
# echo detection:
e.ttl_pulse(TXEnableDelay, value=TXEnableValue) # enable RF amplifier
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # apply 90-degree pulse
e.wait(D3-P90/2-TXEnableDelay) # echo delay
e.set_phase(PH4) # set phase for next pulse
e.ttl_pulse(TXEnableDelay, value=TXEnableValue) # enable RF amplifier
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # apply 90-degree pulse
e.set_phase(PHA) # set phase for receiver
e.wait(D3-P90/2+D4) # echo delay
e.record(SI, SW, sensitivity=ADCSensitivity) # acquisition
# write experiment attributes:
for key in pars.keys():
e.set_description(key, pars[key]) # pulse sequence parameters
e.set_description('run', run) # current scan
e.set_description('rec_phase', -PH2) # current receiver phase
return e
def solidecho_experiment(pars, run):
e=Experiment()
dummy_scans = pars.get('DS')
if dummy_scans:
run -= dummy_scans
pars['PROG'] = 'solidecho_experiment'
# phase lists [from Tecmag's pulse sequence]:
pars['PH1'] = [ 0, 180, 0, 180, 90, 270, 90, 270] # 1st 90-degree pulse
pars['PH3'] = [90, 90, 270, 270, 0, 0, 180, 180] # 2nd 90-degree pulse
pars['PH2'] = [ 0, 180, 0, 180, 90, 270, 90, 270] # receiver
# read in variables:
P90 = pars['P90']
SF = pars['SF']
O1 = pars['O1']
RD = pars['RD']
TAU = pars['TAU']
D4 = pars['D4']
PH1 = pars['PH1'][run%len(pars['PH1'])]
PH3 = pars['PH3'][run%len(pars['PH3'])]
PH2 = pars['PH2'][run%len(pars['PH2'])]
PHA = pars['PHA']
# set sampling parameters:
SI = pars['SI']
SW = pars['SW']
while SW <= 10e6 and SI < 256*1024:
SI *= 2
SW *= 2
# run the pulse sequence:
e.wait(RD) # delay between scans
e.set_frequency(SF+O1, phase=PH1) # set frequency and phase for 1st RF pulse
e.ttl_pulse(TXEnableDelay, value=TXEnableValue) # enable RF amplifier
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # apply 1st 90-degree pulse
e.wait(TAU-P90/2-TXEnableDelay) # wait for TAU
e.set_phase(PH3) # set phase for 2nd 90-degree pulse
e.ttl_pulse(TXEnableDelay, value=TXEnableValue) # enalble RF amplifier
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # apply 2nd 90-degree pulse
e.set_phase(PHA) # set phase for receiver
e.wait(TAU-P90/2+D4) # wait for TAU
e.record(SI, SW, sensitivity=ADCSensitivity) # acquire echo points
# write the experiment parameters:
for key in pars.keys():
e.set_description(key, pars[key]) # pulse sequence parameters
e.set_description('run', run) # current scan
e.set_description('rec_phase', -PH2) # current receiver phase
return e
def spinal_experiment(pars, run):
e=Experiment()
dummy_scans = pars.get('DS')
if dummy_scans:
run -= dummy_scans
pars['PROG'] = 'spinal_experiment'
# 8-step phase cycle (1-14 modifided to deal with T1-recovery and extended for Re/Im imbalance)
pars['PH1'] = [0, 270, 0, 270, 90, 90, 180, 180 ] # 1st (90-degree) pulse
pars['PH3'] = [90,180, 90, 180, 180, 180, 90, 90 ] # 2nd (45-degree) pulse
pars['PH4'] = [90, 90, 270, 270, 180, 0, 0, 180 ] # 3rd (45-degree) pulse
pars['PH2'] = [0, 180, 180, 0, 90, 270, 90, 270 ] # receiver
# read in variables:
P90 = pars['P90']
P45 = pars['P90']*0.5
P1 = pars['P90']*0.5
SF = pars['SF']
O1 = pars['O1']
RD = pars['RD']
D1 = pars['D1']
D2 = pars['D2']
PH1 = pars['PH1'][run%len(pars['PH1'])]
PH3 = pars['PH3'][run%len(pars['PH3'])]
PH4 = pars['PH4'][run%len(pars['PH4'])]
PH2 = pars['PH2'][run%len(pars['PH2'])]
PHA = pars['PHA']
# set sampling parameters:
SI = pars['SI']
SW = pars['SW']
while SW <= 10e6 and SI < 256*1024:
SI *= 2
SW *= 2
# run the pulse sequence:
e.wait(RD) # relaxation delay between scans
e.set_frequency(SF+O1, phase=PH1)
e.ttl_pulse(TXEnableDelay, value=TXEnableValue)
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # 90-degree pulse
e.wait(D1-P90/2-TXEnableDelay) # 'short tau'
e.set_phase(PH3)
e.ttl_pulse(TXEnableDelay, value=TXEnableValue)
e.ttl_pulse(P45, value=TXEnableValue|TXPulseValue) # 45-degree pulse
e.wait(D2-P45/2-TXEnableDelay) # 'long tau'
e.set_phase(PH4)
e.ttl_pulse(TXEnableDelay, value=TXEnableValue)
e.ttl_pulse(P1, value=TXEnableValue|TXPulseValue) # 45-degree pulse
e.wait(TXEnableDelay)
e.set_phase(PHA)
e.wait(5e-6)#D1-P45/2-TXEnableDelay) # 'short tau'
e.record(SI, SW, sensitivity=ADCSensitivity) # acquisition
# write experiment parameters:
for key in pars.keys():
e.set_description(key, pars[key]) # acquisition parameters
e.set_description('run', run) # current scan
e.set_description('rec_phase', -PH2) # current receiver phase
return e
def zeeman_experiment(pars, run):
e=Experiment()
dummy_scans = pars.get('DS')
if dummy_scans:
run -= dummy_scans
pars['PROG'] = 'zeeman_experiment'
# 8-step phase cycle (1-21 modifided to deal with T1-recovery and extended for Re/Im imbalance)
pars['PH1'] = [0, 270, 0, 270, 180, 90, 180, 90] # 1st (90-degree) pulse
pars['PH3'] = [0, 90, 0, 90, 0, 90, 0, 90] # 2nd (90-degree) pulse
pars['PH4'] = [0, 0, 180, 180, 270, 270, 90, 90] # 3rd (90-degree) pulse
pars['PH2'] = [0, 180, 180, 0, 90, 270, 270, 90] # receiver
# read in variables:
P90 = pars['P90']
SF = pars['SF']
O1 = pars['O1']
RD = pars['RD']
D1 = pars['D1']
D2 = pars['D2']
PH1 = pars['PH1'][run%len(pars['PH1'])]
PH3 = pars['PH3'][run%len(pars['PH3'])]
PH4 = pars['PH4'][run%len(pars['PH4'])]
PH2 = pars['PH2'][run%len(pars['PH2'])]
PHA = pars['PHA']
# set sampling parameters:
SI = pars['SI']
SW = pars['SW']
while SW <= 10e6 and SI < 256*1024:
SI *= 2
SW *= 2
# run the pulse sequence:
e.wait(RD) # relaxation delay between scans
e.set_frequency(SF+O1, phase=PH1)
e.ttl_pulse(TXEnableDelay, value=TXEnableValue)
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # 90-degree pulse
e.wait(D1-P90/2-TXEnableDelay) # 'short tau'
e.set_phase(PH3)
e.ttl_pulse(TXEnableDelay, value=TXEnableValue)
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # 90-degree pulse
e.wait(D2-P90/2-TXEnableDelay) # 'long tau'
e.set_phase(PH4)
e.ttl_pulse(TXEnableDelay, value=TXEnableValue)
e.ttl_pulse(P90, value=TXEnableValue|TXPulseValue) # 90-degree pulse
e.wait(TXEnableDelay)
e.set_phase(PHA)
e.wait(D1-P90/2-TXEnableDelay) # 'short tau'
e.record(SI, SW, sensitivity=ADCSensitivity) # acquisition
# write experiment parameters:
for key in pars.keys():
e.set_description(key, pars[key]) # acquisition parameters
e.set_description('run', run) # current scan
e.set_description('rec_phase', -PH2) # current receiver phase
return e