damaris-backends/drivers/Spectrum-MI40xxSeries/Spectrum-MI40xxSeries.cpp

971 lines
42 KiB
C++
Raw Permalink Normal View History

2014-06-26 11:10:51 +00:00
#include <cmath>
#include <stack>
#include <cerrno>
#include <cstring>
#include "pthread.h"
#include "core/core.h"
#include "core/stopwatch.h"
#include "core/result.h"
#include "core/xml_states.h"
#include "Spectrum-MI40xxSeries.h"
#include <sstream>
2014-06-26 11:10:51 +00:00
#ifndef SPC_DEBUG
# define SPC_DEBUG 0
#endif
#ifndef SIZETPRINTFLETTER
# ifndef __LP64__
# define SIZETPRINTFLETTER "u"
# else
# define SIZETPRINTFLETTER "lu"
# endif
#endif
void SpectrumMI40xxSeries::Configuration::print(FILE* f) {
fprintf(f, "Spectrum MI40xx Series Configuration:\n");
fprintf(f, " Sample Frequency %g Hz, Acquisition Timeout %g\n",samplefreq, timeout);
if (data_structure!=NULL)
data_structure->print(f,2);
else
fprintf(f, " No Data to acquire\n");
for (int i=0; i < lSetChannels; i++) {
fprintf(f, " Channel %i: Impedance %f Ohm, Sensitivity %f V, Coupling %s\n", i, impedance[i], sensitivity[i], (coupling==0)?"DC":"AC");
}
}
SpectrumMI40xxSeries::SpectrumMI40xxSeries(const ttlout& t_line, float impedance, int ext_reference_clock) {
// print neat string to inform the user
fprintf(stderr, "Initializing ADC card\n");
// to be configured
device_id=0;
trigger_line=t_line;
default_settings.qwSetChEnableMap = channel_array(ADC_MI_DEFAULT_CHANNELS);
default_settings.lSetChannels = default_settings.qwSetChEnableMap.count();
default_settings.impedance = new double[default_settings.lSetChannels];
default_settings.sensitivity = new double[default_settings.lSetChannels];
default_settings.offset = new int[default_settings.lSetChannels];
for(int i = 0; i < default_settings.lSetChannels; i++) {
default_settings.impedance[i] = ADC_MI_DEFAULT_IMPEDANCE;
default_settings.sensitivity[i] = ADC_MI_DEFAULT_SENSITIVITY; // Set sensitivity in Volts to the default (maximum) value
default_settings.offset[i] = ADC_MI_DEFAULT_OFFSET; // Set offsets in % of sensitivity to default (0)
}
default_settings.ext_reference_clock=ext_reference_clock; // Hz
effective_settings=NULL;
# if defined __linux__
// ----- open driver -----
deviceno = open ("/dev/spc0", O_RDWR);
if (deviceno == -1) {
std::string error_message="could not open /dev/spc0";
if (errno==0) throw SpectrumMI40xxSeries_error( error_message+" (unknown error)");
else throw SpectrumMI40xxSeries_error( error_message+" ("+strerror(errno)+")");
}
# endif
# if defined __CYGWIN__
// open library dll
spectrum_driver_dll = LoadLibrary("spectrum.dll");
if (spectrum_driver_dll==NULL)
throw SpectrumMI40xxSeries_error("could not open driver dll");
deviceno=0;
// load driver functions
# define load_spectrum_function(name) name = ( name##_type)GetProcAddress(spectrum_driver_dll, #name); \
if (name == NULL) { FreeLibrary(spectrum_driver_dll); \
throw SpectrumMI40xxSeries_error("failed to load function" #name "" ); \
}
load_spectrum_function(SpcInitPCIBoards);
load_spectrum_function(SpcGetParam);
load_spectrum_function(SpcSetParam);
load_spectrum_function(SpcGetData);
// find spectrum boards
boardcount=0;
SpcInitPCIBoards(&boardcount,&PCIVersion);
if (boardcount<=0) {
FreeLibrary(spectrum_driver_dll);
throw SpectrumMI40xxSeries_error("no spectrum boards found");
}
# endif
/* calculate the sample number that can be saved without fifo */
int memory_size=0;
SpcGetParam(deviceno,SPC_PCIMEMSIZE,&memory_size);
fifo_minimal_size=memory_size/(sizeof(short int)*2);
/* get the device type */
SpcGetParam(deviceno, SPC_PCITYP, &cardType);
if (cardType != TYP_MI4020 && cardType != TYP_MI4021 && cardType != TYP_MI4022 && cardType != TYP_MI4030 && cardType != TYP_MI4031 && cardType != TYP_MI4032) {
throw SpectrumMI40xxSeries_error("Board type not supported");
}
/* make a check, whether spectrum board is running */
int actual_status=0;
SpcGetParam(deviceno, SPC_STATUS, &actual_status);
if (actual_status!=SPC_READY) {
fprintf(stderr, "Warning: Spectrum board was is running before reset.\n");
}
#if SPC_DEBUG
fprintf(stderr,"External reference clock: %i\n",default_settings.ext_reference_clock);
#endif
int ErrorOccurred=1;
SpcSetParam(deviceno, SPC_COMMAND, SPC_RESET)==ERR_OK && // reset device first
SpcSetParam (deviceno, SPC_GATE, 1)==ERR_OK && // Gated Triggering
SpcSetParam (deviceno, SPC_PLL_ENABLE, 1)==ERR_OK && // Internal PLL enabled for clock
SpcSetParam (deviceno, SPC_CLOCKOUT, 0)==ERR_OK && // No clock output
SpcSetParam (deviceno, SPC_REFERENCECLOCK, default_settings.ext_reference_clock)==ERR_OK && // external reference clock
SpcSetParam (deviceno, SPC_EXTERNALCLOCK, 0)==ERR_OK && // but no external sample clock
SpcSetParam (deviceno, SPC_CLOCK50OHM, 0)==ERR_OK && // clock input NOT with 50Ohm impedance
SpcSetParam (deviceno, SPC_TRIGGERMODE, TM_TTLPOS)==ERR_OK && // ttl trigger is used
SpcSetParam (deviceno, SPC_TRIGGEROUT, 0)==ERR_OK && // No trigger output
SpcSetParam (deviceno, SPC_TRIGGER50OHM, 0)==ERR_OK && // Trigger to 1MOhm, necessary for steep slopes
(ErrorOccurred=0); // done, really no error occurred
// ----- driver error: request error and end program -----
if (ErrorOccurred!=0) {
int32 lErrorCode, lErrorReg, lErrorValue;
SpcGetParam (deviceno, SPC_LASTERRORCODE, &lErrorCode);
SpcGetParam (deviceno, SPC_LASTERRORREG, &lErrorReg);
SpcGetParam (deviceno, SPC_LASTERRORVALUE, &lErrorValue);
char error_message[256];
snprintf(error_message, sizeof(error_message),"Configuration error %d in register %d at value %d", lErrorCode, lErrorReg, lErrorValue);
throw SpectrumMI40xxSeries_error(error_message);
}
/* print lines with useful information: */
fprintf(stderr, "Spectrum MI40xx series board with %d byte memory\n", memory_size);
fprintf(stderr,
" impedance set to %g Ohm\n expecting trigger on id=%d ttl=0x%lx\n external clock frequency is %f Hz\n",
2014-06-26 11:10:51 +00:00
impedance,
t_line.id,
t_line.ttls.to_ulong(),
(float)ext_reference_clock );
}
void SpectrumMI40xxSeries::sample_after_external_trigger(double rate, size_t samples, double sensitivity, size_t resolution) {
throw SpectrumMI40xxSeries_error("SpectrumMI40xxSeries::sample_after_external_trigger is not jet implemented");
}
void SpectrumMI40xxSeries::collect_config_recursive(state_sequent& exp, SpectrumMI40xxSeries::Configuration& settings) {
/* start with dummy node */
DataManagementNode* new_branch=new DataManagementNode(NULL);
DataManagementNode* where_to_append=new_branch;
double parent_timeout=settings.timeout;
settings.timeout=0.0;
/* loop over all states and sequences */
for (state_sequent::iterator i=exp.begin(); i!=exp.end(); ++i) {
state* a_state=dynamic_cast<state*>(*i);
if (a_state==NULL)
throw SpectrumMI40xxSeries_error("state_atom not expected in sate_sequent");
if (dynamic_cast<state_parallel*>(*i)!=NULL)
throw SpectrumMI40xxSeries_error("state_parallel handling is not jet implemented");
state_sequent* a_sequence=dynamic_cast<state_sequent*>(a_state);
if (a_sequence!=NULL) {
// found a sequence
DataManagementNode* tmp_structure=settings.data_structure;
settings.data_structure=where_to_append;
collect_config_recursive(*a_sequence, settings);
settings.data_structure=tmp_structure;
} /* end working on sequence */
else {
2014-06-26 11:10:51 +00:00
// found a state, not a sequence
settings.timeout+=a_state->length;
2014-06-26 11:10:51 +00:00
#if SPC_DEBUG
fprintf(stderr,"SETTINGS %e %e\n",settings.timeout, a_state->length);
2014-06-26 11:10:51 +00:00
#endif
// collect analogin sections in state
std::list<analogin*> inputs;
/* loop over all device definitions in a state */
state::iterator j=a_state->begin();
while (j!=a_state->end()) {
analogin* input=dynamic_cast<analogin*>(*j);
if (input!=NULL && input->id==device_id) {
/* collect appropiate analogin sections, forget others */
if (input->samples<=0 || input->sample_frequency<=0)
delete input;
else
inputs.push_back(input);
j=a_state->erase(j);
} else
++j;
}
if (!inputs.empty()) {
/* evaluate the found analogin definitions */
if (inputs.size()>1) {
while (!inputs.empty()) {
delete inputs.front();
inputs.pop_front();
}
throw ADC_exception("can not handle more than one analogin section per state");
}
/* save sampling frequency */
if (settings.samplefreq<=0)
settings.samplefreq=inputs.front()->sample_frequency;
else if (settings.samplefreq != inputs.front()->sample_frequency) {
while (!inputs.empty()) {
delete inputs.front();
inputs.pop_front();
}
throw ADC_exception("Sorry, but gated sampling requires same sampling frequency in all analogin sections");
}
/* save channel mask and number of channels */
if (settings.lSetChannels > 0 && settings.qwSetChEnableMap.to_ulong() > 0) {
if (settings.qwSetChEnableMap != inputs.front()->channels) {
fprintf(stderr, "Warning! different channels enabled in input %lu and in config %lu, setting to default \n",
settings.qwSetChEnableMap.to_ulong(),
inputs.front()->channels.to_ulong());
settings.qwSetChEnableMap = channel_array(ADC_MI_DEFAULT_CHANNELS);
settings.lSetChannels = settings.qwSetChEnableMap.count();
}
} else {
settings.qwSetChEnableMap = inputs.front()->channels;
settings.lSetChannels = inputs.front()->nchannels;
}
/* save sensitivity */
if (settings.sensitivity != NULL) { // if sensitivity is set, make sure it's valid (i.e. the same for all inputs)
for (int k = 0; k < inputs.front()->nchannels; k++) {
if (settings.sensitivity[k] != inputs.front()->sensitivity[k]) {
fprintf(stderr, "Warning! different sensitivity specified (here %f, elsewhere %f), choosing higher voltage\n",
settings.sensitivity[k],
inputs.front()->sensitivity[k]);
if (settings.sensitivity[k] < inputs.front()->sensitivity[k]) {
settings.sensitivity[k] = inputs.front()->sensitivity[k];
}
}
}
} else {
settings.sensitivity = inputs.front()->sensitivity;
}
// check if sensitivity is valid
for (int k = 0; k < inputs.front()->nchannels; k++) {
bool sensAllowed = false;
for (int l = 0; l < ADC_MI_ALLOWED_SENSITIVITY_LENGTH; l++) {
if (settings.sensitivity[k] == ADC_MI_ALLOWED_SENSITIVITY[l] ) {
sensAllowed = true;
break;
}
}
if (!sensAllowed) {
fprintf(stderr, "Warning! Illegal sensitivity specified for channel %i: %f", k, inputs.front()->sensitivity[k]);
settings.sensitivity[k] = ADC_MI_DEFAULT_SENSITIVITY;
}
}
/* save impedance */
if (settings.impedance != NULL) {
for (int k = 0; k < inputs.front()->nchannels; k++) {
if (settings.impedance[k] != inputs.front()->impedance[k]) {
fprintf(stderr, "Warning! different impedance specified (here %f, elsewhere %f), setting to default\n",
settings.impedance[k],
inputs.front()->impedance[k]);
settings.impedance[k] = ADC_MI_DEFAULT_IMPEDANCE;
}
if (settings.impedance[k] != ADC_MI_DEFAULT_IMPEDANCE && settings.impedance[k] != ADC_MI_ALLOWED_IMPEDANCE) {
fprintf(stderr, "Warning! Illegal impedance specified for channel %i: %f",k, inputs.front()->impedance[k]);
settings.offset[k] = 0;
}
}
} else {
settings.impedance = inputs.front()->impedance;
}
/* save offsets */
if (settings.offset != NULL) {
for (int k = 0; k < inputs.front()->nchannels; k++) {
if (settings.offset[k] != inputs.front()->offset[k]) {
fprintf(stderr, "Warning! different impedance specified (here %i, elsewhere %i), setting to default\n",
settings.offset[k],
inputs.front()->offset[k]);
settings.offset[k] = ADC_MI_DEFAULT_OFFSET;
}
if (inputs.front()->offset[k] > 100 || inputs.front()->offset[k] < -100) {
fprintf(stderr, "Warning! Illegal offset specified for channel %i: %i", k, inputs.front()->offset[k]);
settings.offset[k] = 0;
}
}
} else {
settings.offset = inputs.front()->offset;
}
if (inputs.front()->samples%4 != 0) {
throw ADC_exception("Number of samples must be a multiple of four");
}
// calculate the time required
double delayed_gating_time=0.0;
// the gating time has an offset, which was found to be 1.5 dwelltimes for <2.5MHz and 4.5 dwelltimes for >=2.5MHz
double gating_time;
#if SPC_DEBUG
fprintf(stderr, "Channels: %lu\n", settings.qwSetChEnableMap.to_ulong());
#endif
/* check if channel mask is legal for the card */
if (this->IsChannelMaskLegal(inputs.front()->channels.to_ulong())) {
settings.qwSetChEnableMap = inputs.front()->channels;
settings.lSetChannels = inputs.front()->nchannels;
} else {
throw SpectrumMI40xxSeries_error("Selected channels combination not allowed for this card type");
}
/* apply proper timing */
if ( settings.qwSetChEnableMap.to_ulong()==(CHANNEL0|CHANNEL1) || settings.qwSetChEnableMap.to_ulong()==(CHANNEL0|CHANNEL1|CHANNEL2|CHANNEL3) ) {
#if SPC_DEBUG
fprintf(stderr, "Default Channels\n");
#endif
if (settings.samplefreq<2.5e6) {
// if sampling rate is <2.5MHz, there is another data handling mode,
// see MI4021 manual page 79: "Accquisition Delay: -6 Samples"
// it might be necessary to add 0.1 dwelltime to shift the sampling start a little more...
// edit by Stefan Reutter @2013-06, it seems that the MI4021 cards actually have a second
// threshold at 500 kHz that is not mentioned in the manual.
// this can be tested by disabling the if below and switching over the threshold
gating_time=(inputs.front()->samples)/settings.samplefreq;
if (settings.samplefreq >= 5e5) {
delayed_gating_time=ceil(1e8*6.0/settings.samplefreq)/1e8;
} else {
delayed_gating_time=0.0;
}
} else {
gating_time=(inputs.front()->samples+3)/settings.samplefreq;
delayed_gating_time=0.0;
}
}
// disabled the more exotic channel setup as it is untested with the updated timings and probably not used anyways
/* else if (settings.qwSetChEnableMap.to_ulong()==CHANNEL0 || settings.qwSetChEnableMap.to_ulong()==(CHANNEL0|CHANNEL2) ) {
#if SPC_DEBUG
fprintf(stderr, "Weird Channels\n");
#endif
if (settings.samplefreq<5e6) {
gating_time=(inputs.front()->samples+1.5)/settings.samplefreq;
delayed_gating_time=ceil(1e8*6.0/settings.samplefreq)/1e8;
} else {
gating_time=(inputs.front()->samples+4.5)/settings.samplefreq;
delayed_gating_time=-ceil(1e8*7.0/settings.samplefreq)/1e8;
} */else {
throw SpectrumMI40xxSeries_error("Selected channels combination not allowed");
}
gating_time=ceil(1e8*gating_time)/1e8;
double time_required=delayed_gating_time+gating_time;
// check time requirements
if (a_state->length < gating_time) {
#if SPC_DEBUG
fprintf(stderr, "state is shorter than acquisition time %e time required, %e state time\n", gating_time, a_state->length);
#endif
// update the state length if it's shorter than the gate. this is usually due to rounding to 10 ns for the pulseblaster
if (ceil(1e8*(a_state->length + 3.0f/settings.samplefreq))/1e8 < time_required) { //
std::stringstream parameter_inf;
parameter_inf << "state is (" << inputs.front()->samples << " samples, " << settings.samplefreq << " sampling rate, " << time_required << " time required, " << a_state->length << " state time)" << std::endl;
throw ADC_exception(parameter_inf.str());
2014-06-26 11:10:51 +00:00
} else {
a_state->length = time_required;
}
}
// if necessary, add the gating pulse delay...
if (delayed_gating_time>0.0) {
state* delayed_gating_state=new state(*a_state);
delayed_gating_state->length=delayed_gating_time;
// insert before me
exp.insert(i,(state_atom*)delayed_gating_state);
} else if (delayed_gating_time < 0.0) {
/*
For +samples delays
1. get the previous state
2. if the length is not long enough (6*dw) add the state before
3. split the state(s) so that we have the gating on 6*dw before the actual recording
*/
double rest_length = delayed_gating_time;
state_sequent::iterator i_prev;
state* prev_state;
i_prev = i;
do {
i_prev--;
prev_state = dynamic_cast<state*>(*(i_prev));
rest_length -= prev_state->length;
fprintf(stderr, "DW rest_length: %g\n", rest_length);
fprintf(stderr, "DW state_length: %g\n", prev_state->length);
if (rest_length >= 0)
prev_state->push_back(trigger_line.copy_new()); // add trigger to this state
else { // split final state
state* prev_state_1 = prev_state->copy_flat(); //create copy of current state
prev_state_1->length += rest_length; // adjust 1st part length
exp.insert(i_prev,(state_atom*) prev_state_1); // insert AFTER prev_state
prev_state->length = -rest_length; // adjust 2nd part length
prev_state->push_back(trigger_line.copy_new()); // add trigger to 2nd part
break;
}
} while (i_prev!=exp.begin() || rest_length > 0.0);
}
# if SPC_DEBUG
fprintf(stderr, "sequence after pre_trigger correction:\n");
xml_state_writer().write_states(stderr, exp);
# endif
// adapt the pulse program for gated sampling
if (a_state->length == gating_time) {
// state has proper length
a_state->push_back(trigger_line.copy_new());
} else {
# if SPC_DEBUG
fprintf(stderr, "state too long, length %e, time required %e\n", a_state->length, time_required);
# endif
// state is too long...
// create new one with proper time and gated sampling pulse
state* gated_sampling_pulse=new state(*a_state);
gated_sampling_pulse->length=gating_time;
gated_sampling_pulse->push_back(trigger_line.copy_new());
// insert gate pulse state before remaining (original) state
exp.insert(i,(state_atom*)gated_sampling_pulse);
// shorten this state
a_state->length-=time_required;
}
# if SPC_DEBUG
fprintf(stderr, "sequence after correcting trigger state:\n");
xml_state_writer().write_states(stderr, exp);
# endif
/* save sampleno */
DataManagementNode* new_one=new DataManagementNode(new_branch);
new_one->n=inputs.front()->samples;
new_one->child=NULL;
new_one->next=where_to_append->next;
where_to_append->next=new_one;
where_to_append=new_one;
while (!inputs.empty()) {delete inputs.front(); inputs.pop_front();}
} /* !inputs.empty() */
} /* end working on state */
} /* i */
/* something happened? */
if (new_branch->next!=NULL) {
/* make dummy node to a loop */
new_branch->n=exp.repeat;
new_branch->child=new_branch->next;
/* if possible, append it */
if (settings.data_structure!=NULL) {
new_branch->parent=settings.data_structure->parent;
new_branch->next=settings.data_structure->next;
settings.data_structure->next=new_branch;
}
else {
new_branch->parent=NULL;
new_branch->next=NULL;
settings.data_structure=new_branch;
}
}
else
delete new_branch;
settings.timeout*=exp.repeat;
settings.timeout+=parent_timeout;
#ifdef SPC_DEBUG
fprintf(stderr,"setting.timout %g\n",settings.timeout);
#endif
return;
}
static void* SpectrumMI40xxSeries_TimeoutThread(void* data) {
int *ret = new int;
*ret = ((SpectrumMI40xxSeries*)data)->TimeoutThread();
return (void*) ret;
}
void SpectrumMI40xxSeries::set_daq(state & exp) {
// cleanup?!
if (!fifobuffers.empty()) {
fprintf(stderr, "normally there should be a cleanup at the end of acquisition\n");
for (std::vector<short int*>::iterator i=fifobuffers.begin(); i!=fifobuffers.end(); ++i) free(*i);
fifobuffers.clear();
}
/* what could be done: PCIBIT_GATE, PCIBIT_MULTI */
int features;
SpcGetParam(deviceno,SPC_PCIFEATURES,&features);
state_sequent* exp_sequence=dynamic_cast<state_sequent*>(&exp);
if (exp_sequence==NULL)
throw ADC_exception("Spectrum-MI40xxSeries::set_daq only working on sequences");
# if SPC_DEBUG
fprintf(stderr, "working on sequence:\n");
xml_state_writer().write_states(stderr, *exp_sequence);
# endif
/* find out what to do */
Configuration* conf=new Configuration();
collect_config_recursive(*exp_sequence, *conf);
if (conf->samplefreq<=0) conf->samplefreq=default_settings.samplefreq;
if (conf->impedance == NULL) conf->impedance = default_settings.impedance;
if (conf->sensitivity == NULL) conf->sensitivity = default_settings.sensitivity;
if (conf->offset == NULL) conf->offset = default_settings.offset;
if (conf->lSetChannels == 0) {
conf->lSetChannels = default_settings.lSetChannels;
conf->qwSetChEnableMap = default_settings.qwSetChEnableMap;
}
size_t sampleno=(conf->data_structure==NULL)?0:conf->data_structure->size();
/* nothing to do! */
if (sampleno==0) {
fprintf(stderr, "oops, no sample number\n");
2014-06-26 11:10:51 +00:00
delete conf;
effective_settings=NULL;
return;
}
if (sampleno<16 || sampleno%16!=0) {
delete conf;
throw SpectrumMI40xxSeries_error("Total number of samples must be multiple of 16 and at least 16");
}
effective_settings=conf;
#if SPC_DEBUG
/* settings for this experiment */
conf->print(stderr);
#endif
/* make a check, whether spectrum board is running */
int actual_status=0;
SpcGetParam (deviceno, SPC_STATUS, &actual_status);
if (actual_status!=SPC_READY) {
fprintf(stderr, "Warning: Spectrum board was/is running before starting data aquisition.\n");
SpcSetParam (deviceno, SPC_COMMAND, SPC_STOP); // stop the board
}
/* and the dirty things there...
----- setup board for recording -----
*/
for (unsigned int j=0; j<(unsigned int)effective_settings->lSetChannels; j++) {
SpcSetParam (deviceno, SPC_AMP0 + 100*j, (int)floor(effective_settings->sensitivity[j]*1000)); // +/- 5V input range
SpcSetParam (deviceno, SPC_50OHM0 + 100*j, ((effective_settings->impedance[j]==50.0)?1:0)); // 1 = 50 Ohm input impedance, 0 = 1MOhm input impedance
SpcSetParam (deviceno, SPC_OFFS0 + 100*j, effective_settings->offset[j]); // set offset to zero
}
SpcSetParam (deviceno, SPC_CHENABLE, effective_settings->qwSetChEnableMap.to_ulong()); // Enable channels for recording
int activated_channels;
SpcGetParam (deviceno, SPC_CHENABLE, &activated_channels);
SpcSetParam (deviceno, SPC_SAMPLERATE, (int)floor(effective_settings->samplefreq)); // Samplerate
// the MI4021 card doesn't accept all sampling frequency settings. check if the sampling rate is set correctly. if not, throw an exception
int setSamplingRate = 0;
SpcGetParam (deviceno, SPC_SAMPLERATE, &setSamplingRate);
if (setSamplingRate != (int)floor(effective_settings->samplefreq)) {
char parameter_info[16];
snprintf(parameter_info,sizeof(parameter_info), "%d", setSamplingRate);
throw ADC_exception(std::string("DAC sampling rate not available. Try setting to: ")+parameter_info);
}
// decide for aquisition mode and start it
int16 nErr=ERR_OK;
if (sampleno<fifo_minimal_size) {
#if SPC_DEBUG
fprintf(stderr, "expecting %" SIZETPRINTFLETTER " samples in normal mode\n",sampleno);
#endif
SpcSetParam (deviceno, SPC_MEMSIZE, sampleno); // Memory size
// ----- start the board -----
nErr = SpcSetParam (deviceno, SPC_COMMAND, SPC_START); // start the board
} else {
#if SPC_DEBUG
fprintf(stderr, "expecting %" SIZETPRINTFLETTER " samples in fifo mode\n",sampleno);
#endif
// todo: fifo should really write directly to recursive gated sampling structures
fifo_adc_data=(short int*)malloc(sampleno*sizeof(short int)*2);
if (fifo_adc_data==NULL) {
throw SpectrumMI40xxSeries_error("could not allocate adc data memory for fifo recording");
}
// ToDo: do some magic calculations
fifobufferno=16;
fifobufferlen=1<<20;
#if SPC_DEBUG
fprintf(stderr, "configuring for %" SIZETPRINTFLETTER " buffers, each of size %" SIZETPRINTFLETTER "\n", fifobufferno, fifobufferlen);
#endif
SpcSetParam(deviceno,SPC_FIFO_BUFFERS,fifobufferno);
SpcSetParam(deviceno,SPC_FIFO_BUFLEN,fifobufferlen);
// allocate FIFO buffers
fifobuffers.resize(fifobufferno,(short int*)NULL);
for (size_t i=0; i!=fifobufferno; ++i) {
void* newbuffer;
#if SPC_DEBUG
fprintf(stderr, "allocating fifobuffer %" SIZETPRINTFLETTER "...", i);
#endif
newbuffer=malloc(fifobufferlen);
if (newbuffer==NULL) {
// free the buffers, if there is not enough memory
for (size_t j=0; j!=i; ++j) free(fifobuffers[j]);
fifobuffers.clear();
throw SpectrumMI40xxSeries_error("could not allocate buffers for fifo mode");
}
#if SPC_DEBUG
fprintf(stderr, "and registering with ADC driver....");
#endif
fifobuffers[i]=(short int*)newbuffer;
// todo: check for errors
#ifndef _LINUX64
SpcSetParam (deviceno, SPC_FIFO_BUFADR0+i, (int32) newbuffer);
#else
// 64 bit Linux needs SetAdr function, 32 bit linux can also use this if driver build > 1093
SpcSetAdr (deviceno, SPC_FIFO_BUFADR0+i, newbuffer);
#endif
#if SPC_DEBUG
fprintf(stderr, "success.\n");
#endif
}
#if SPC_DEBUG
fprintf(stderr, "starting fifo thread\n");
#endif
// to do: append a new state to overcome problems with fifo...
// need another thread, that collects the data
pthread_attr_init(&timeout_pt_attrs);
pthread_create(&timeout_pt, &timeout_pt_attrs, SpectrumMI40xxSeries_TimeoutThread,(void*)this);
}
// ----- driver error: request error and end program -----
if (nErr != ERR_OK) {
if (effective_settings!=NULL) delete effective_settings;
effective_settings=NULL;
for (std::vector<short int*>::iterator i=fifobuffers.begin(); i!=fifobuffers.end(); ++i) free(*i);
fifobuffers.clear();
// create an error message
int32 lErrorCode, lErrorReg, lErrorValue;
SpcGetParam (deviceno, SPC_LASTERRORCODE, &lErrorCode);
SpcGetParam (deviceno, SPC_LASTERRORREG, &lErrorReg);
SpcGetParam (deviceno, SPC_LASTERRORVALUE, &lErrorValue);
char error_message[256];
snprintf(error_message, sizeof(error_message),"Configuration error %d in register %d at value %d", lErrorCode, lErrorReg, lErrorValue);
throw SpectrumMI40xxSeries_error(error_message);
}
}
double SpectrumMI40xxSeries::get_sample_clock_frequency() const {
if (effective_settings==NULL ||
effective_settings->samplefreq<=0 ||
effective_settings->data_structure==NULL ||
effective_settings->data_structure->size()==0)
return 0;
return effective_settings->samplefreq;
}
int SpectrumMI40xxSeries::TimeoutThread() {
// now collect data
assert(effective_settings!=NULL);
size_t sampleno=effective_settings->data_structure->size();
size_t buff_number_expected=(sampleno*2*sizeof(short int)+fifobufferlen-1)/fifobufferlen;
SpcSetParam(deviceno, SPC_FIFO_BUFMAXCNT, buff_number_expected);
size_t buff_number=0;
short int* buff_pointer=fifo_adc_data;
// start fifo aquisition
#if SPC_DEBUG
fprintf(stderr, "SPC_FIFOSTART\n");
#endif
SpcSetParam(deviceno, SPC_COMMAND, SPC_FIFOSTART);
do {
// wait for the buffers
pthread_testcancel();
#if SPC_DEBUG
fprintf(stderr, "reading buffer no %" SIZETPRINTFLETTER "/%" SIZETPRINTFLETTER "\n", buff_number+1, buff_number_expected);
#endif
if (buff_number+1==buff_number_expected) {
// the last one is special, copy only expected bytes
memcpy(buff_pointer, fifobuffers[buff_number%(fifobuffers.size())], sampleno*2*sizeof(short int)-fifobufferlen*buff_number);
break;
}
else
buff_pointer=(short int*)mempcpy(buff_pointer, fifobuffers[buff_number%(fifobuffers.size())], fifobufferlen);
SpcSetParam(deviceno,SPC_FIFO_BUFREADY, buff_number%(fifobuffers.size()));
buff_number++;
int buff_available;
SpcGetParam(deviceno, SPC_FIFO_BUFCOUNT, &buff_available);
if (((size_t)buff_available)>buff_number) {
// get also the next buffer...
#if SPC_DEBUG
fprintf(stderr, "read %" SIZETPRINTFLETTER " buffers, %d buffers gained by the hardware sofar\n", buff_number, buff_available);
#endif
continue;
}
int adc_status;
#if SPC_DEBUG
fprintf(stderr, "SPC_STATUS\n");
#endif
SpcGetParam (deviceno, SPC_STATUS, &adc_status);
if (adc_status==SPC_READY) {
// this must be a timeout!
//pthread_cancel(timeout_pt);
//pthread_join(timeout_pt,NULL);
//pthread_attr_destroy(&timeout_pt_attrs);
free(fifo_adc_data);
fifo_adc_data=NULL;
2016-12-19 14:03:14 +00:00
throw SpectrumMI40xxSeries_error("timeout occured while collecting data");
2014-06-26 11:10:51 +00:00
return 0;
}
#if SPC_DEBUG
fprintf(stderr, "waiting for next fifo buffer\n");
fprintf(stderr, "SPC_FIFOWAIT\n");
#endif
SpcSetParam(deviceno, SPC_COMMAND, SPC_FIFOWAIT);
}
while (buff_number<buff_number_expected);
#if SPC_DEBUG
fprintf(stderr, "SPC_STOP\n");
#endif
SpcSetParam(deviceno, SPC_COMMAND, SPC_STOP);
return 1;
}
short int* SpectrumMI40xxSeries::split_adcdata_recursive(short int* data, const DataManagementNode& structure, adc_results& result_splitted) {
short nchannels = effective_settings->lSetChannels;
if (structure.child==NULL) {
// simple case: do real work
// todo: Channel selection
short int* datachunk=(short int*)malloc(sizeof(short int)*structure.n*nchannels);
if (datachunk==NULL) {
throw SpectrumMI40xxSeries_error("not enough memory to create results");
}
// todo: error checking
memcpy(datachunk, data, sizeof(short int)*structure.n*nchannels);
data+=structure.n*nchannels;
adc_result* the_result=new adc_result(0, structure.n, datachunk, effective_settings->samplefreq,nchannels);
result_splitted.push_back(the_result);
if (structure.next!=NULL)
data=split_adcdata_recursive(data, *(structure.next), result_splitted);
}
else
for (size_t i=0; i<structure.n; ++i) {
data=split_adcdata_recursive(data, *(structure.child), result_splitted);
}
return data;
}
result* SpectrumMI40xxSeries::get_samples(double _timeout) {
if (core::term_signal!=0) return NULL;
size_t sampleno=(effective_settings==NULL || effective_settings->data_structure==NULL)?0:effective_settings->data_structure->size();
if (sampleno==0) return new adc_result(1,0,NULL);
short nchannels=(effective_settings==NULL)?0:effective_settings->lSetChannels;
if (nchannels==0) throw SpectrumMI40xxSeries_error("No channels specified");
// double timeout=_timeout;
#if SPC_DEBUG
fprintf(stderr,"effective_settings in get_samples: %g\n",effective_settings->timeout);
#endif
// allocate a lot of space
// todo: use GatedSampling buffers directly!
if (fifobuffers.empty()) {
#if SPC_DEBUG
printf("ADC not in FIFO mode\n");
#endif
short int* adc_data=(short int*)malloc(sampleno*sizeof(short int)*nchannels);
if (adc_data==NULL) {
for (std::vector<short int*>::iterator i=fifobuffers.begin(); i!=fifobuffers.end(); ++i) free(*i);
fifobuffers.clear();
throw SpectrumMI40xxSeries_error("could not allocate adc data memory");
}
// simple version: standard acquisition, wait and get...
#if SPC_DEBUG
fprintf(stderr, "fetching %" SIZETPRINTFLETTER " samples in normal mode (timeout is %g)\n",sampleno,effective_settings->timeout);
#endif
stopwatch adc_timer;
adc_timer.start();
int adc_status, i;
double elapsed_time=0;
/*
The gate-end signal can only be recognized at an eigth samples alignement.
The board can record up to 7 more samples, the timeout has to be allowed to be longer
*/
double post_gate_maxtime=(1e8*7.5/effective_settings->samplefreq)/1e8;
i = 0;
SpcGetParam(deviceno, SPC_STATUS, &adc_status);
/*
Sometimes the timeout is not enough, the reason could be that the timer
starts running before the actual start of the pulse program because the OS is not loading and starting
the pulseblaster immediatly. It is not possible to
synchronize the timers for now.
2016-12-19 14:03:14 +00:00
Thus, we add a generous 1s to the timeout to be on the safe side.
2014-06-26 11:10:51 +00:00
*/
2016-12-19 14:03:14 +00:00
while (core::term_signal==0 && adc_status!=SPC_READY && elapsed_time<=(effective_settings->timeout + post_gate_maxtime + 1) ) {
2014-06-26 11:10:51 +00:00
timespec sleeptime;
sleeptime.tv_nsec=10*1000*1000; // 10 ms
sleeptime.tv_sec=0;
nanosleep(&sleeptime,NULL);
SpcGetParam(deviceno, SPC_STATUS, &adc_status);
elapsed_time=adc_timer.elapsed();
#if SPC_DEBUG
fprintf(stderr, "(nofifo) loop %i (adc_status, t, t_out, post_gate, core): %i %g %g %g %i\n",i,adc_status, elapsed_time, effective_settings->timeout, post_gate_maxtime, core::term_signal);
#endif
i++;
}
#if SPC_DEBUG
fprintf(stderr, "(nofifo) loop stopped (adc_status, t, t_out, core): %i %g %g %i\n",adc_status, elapsed_time, effective_settings->timeout, core::term_signal);
#endif
/* card ready to transfer samples */
if (adc_status!=SPC_READY) {
free(adc_data);
#if SPC_DEBUG
fprintf(stderr, "ERROR: adc_status not ready (%i) \n",adc_status );
#endif
throw SpectrumMI40xxSeries_error("timeout occured while collecting data");
}
SpcSetParam(deviceno, SPC_COMMAND, SPC_STOP);
if (core::term_signal!=0) {
#if SPC_DEBUG
fprintf(stderr, "received core::term_signal %i\n",core::term_signal);
#endif
free(adc_data);
return NULL;
}
# if defined __linux__
size_t data_length=SpcGetData (deviceno, 0, 0, nchannels * sampleno, 2, (dataptr) adc_data);
# if SPC_DEBUG
fprintf(stderr, "SpcGetData returned %" SIZETPRINTFLETTER " bytes, got %" SIZETPRINTFLETTER " out of %" SIZETPRINTFLETTER " expected samples\n", data_length, data_length/sizeof(short int)/2, sampleno);
# endif
if (nchannels*sizeof(short int)*sampleno!=data_length) {
free(adc_data);
throw SpectrumMI40xxSeries_error("wrong amount of data from adc card");
}
// current position in adc data array
# elif defined __CYGWIN__
int16 read_result=SpcGetData (deviceno, 0, 0, nchannels * sampleno,(void*) adc_data);
# if SPC_DEBUG
fprintf(stderr, "SpcGetData returned %d\n", read_result);
# endif
if (read_result!=0) {
free(adc_data);
throw SpectrumMI40xxSeries_error("wrong amount of data from adc card");
}
# endif
short int* data_position=adc_data;
// produced results
adc_results* the_results=new adc_results(0);
data_position=split_adcdata_recursive(data_position, *(effective_settings->data_structure), *the_results);
if (data_position==0 || (size_t)(data_position-adc_data)!=(sampleno*nchannels)) {
fprintf(stderr,"something went wrong while spliting data\n");
}
free(adc_data);
delete effective_settings;
effective_settings=NULL;
return the_results;
}
else {
#if SPC_DEBUG
printf("ADC in FIFO mode!\n");
fprintf(stderr, "fetching %" SIZETPRINTFLETTER " samples in fifo mode (timeout is %g)\n",sampleno,effective_settings->timeout);
#endif
// FIFO method
stopwatch timer;
timer.start();
do {
int32 lStatus;
timespec sleeptime;
sleeptime.tv_sec=0;
sleeptime.tv_nsec=100*1000*1000;
nanosleep(&sleeptime,NULL);
//pthread_testcancel();
SpcGetParam (deviceno, SPC_STATUS, &lStatus);
#if SPC_DEBUG
fprintf(stderr, "while loop FIFO (lStatis, timer, effective_timeout): %i %g %g\n",lStatus, timer.elapsed(), effective_settings->timeout );
#endif
if (lStatus == SPC_READY) break;
} while (timer.elapsed()<effective_settings->timeout); //rosi _timeout
SpcSetParam(deviceno, SPC_COMMAND, SPC_STOP);
#if SPC_DEBUG
fprintf(stderr, "waiting for read thread terminating\n");
#endif
/* wait for read thread */
pthread_cancel(timeout_pt);
pthread_join(timeout_pt,NULL);
pthread_attr_destroy(&timeout_pt_attrs);
/* free it's resources */
#if SPC_DEBUG
fprintf(stderr, "freeing fifo data buffers\n");
#endif
for (std::vector<short int*>::iterator i=fifobuffers.begin(); i!=fifobuffers.end(); ++i) free(*i);
fifobuffers.clear();
adc_results* the_results=NULL;
if (fifo_adc_data!=NULL) {
// split data to (small) pieces
short int* data_position=fifo_adc_data;
the_results=new adc_results(0);
data_position=split_adcdata_recursive(data_position, *(effective_settings->data_structure), *the_results);
if (data_position==0 || (size_t)(data_position-fifo_adc_data)!=(sampleno*nchannels)) {
fprintf(stderr,"something went wrong while spliting data from fifo mode\n");
}
free(fifo_adc_data);
fifo_adc_data=NULL;
}
else
fprintf(stderr,"something went wrong while collecting data with fifo mode\n");
delete effective_settings;
effective_settings=NULL;
return the_results;
}
}
/* check whether a channel mask is legal for this board */
bool SpectrumMI40xxSeries::IsChannelMaskLegal(int mask) {
if ( (cardType == TYP_MI4020 || cardType == TYP_MI4030) && mask != CHANNEL0) {
return false;
} else if ( (cardType == TYP_MI4021 || cardType == TYP_MI4031) && mask != (CHANNEL0 | CHANNEL1) && mask != CHANNEL0) {
return false;
} else if ((cardType == TYP_MI4022 || cardType == TYP_MI4032) && mask != (CHANNEL0 | CHANNEL1 | CHANNEL2 | CHANNEL3) && mask != (CHANNEL0 | CHANNEL1) && mask != (CHANNEL0 | CHANNEL2) && mask != CHANNEL0) {
return false;
}
return true;
}
SpectrumMI40xxSeries::~SpectrumMI40xxSeries() {
SpcSetParam (deviceno, SPC_COMMAND, SPC_STOP); // stop the board
# if defined __linux__
close (deviceno);
# elif defined __CYGWIN__
FreeLibrary(spectrum_driver_dll);
# endif
}